Wall-Mount Nitrogen Generator
Wall-Mount Nitrogen Generator
Wall-Mount Nitrogen Generator

Wall-Mount Nitrogen Generator

This product is not available for online sales. For pricing and purchase information, speak to our sales team.

Existing buildings and small dry or preaction systems require a corrosion management system that works with you at fighting oxygen corrosion. 

Don’t sacrifice quality for compact size – get up to 3,500 gallons of capacity in a generator the size of an electrical panel. Forget the air dryer and the storage tank – when your generator produces ultra-dry nitrogen on-demand, why waste valuable floor space when you can buy one of these space-saving wall-mount nitrogen generators.

ECS GreenSight is our connected remote monitoring solution that gives you the ability to view your device status from anywhere in the world at any time. Signup for an account by following this link. To register your device please call ECS at 314-432-1377.

WALL-MOUNT NITROGEN GENERATORS INFORMATION

Our nitrogen generators are FM 1035 Approved, contain CULUS Listed Open Type Industrial Control Panel, and meet Canadian Standard CSA C22.2 No. 14-13. Our equipment meets all applicable standards and is fully compatible with both new and existing systems. 

For use under U.S. Patents 8,720,591, 9,144,700 and 9,186,533

Installation and Operation Manual (for any legacy models, please contact ECS)

AG-675
  • 675 gallon (2,555 liters) total capacity
  • 235 gallon (890 liters) fill requirement met with integral oil-less compressor
  • 115-120V (200-240V) power required
  • ½” NPT female (15mm) nitrogen supply outlet
  • ¼” NPT female (6.35mm) drain
  • 24.5″ (W) X 36.5″ (H) X 9.25″ (D) (622mm (W) x 927mm (H) x 235mm (D)), 125 lbs (57 kg)
  • FM 1035 Approved

Downloads

AG-675 Product Spec Sheet
AG-675 CAD File

AG-950
  • 950 gallon (3,596 liters) total capacity
  • 235 gallon (890 liters) fill requirement met with integral oil-less compressor
  • 115-120V (200-240V) power required
  • ½” NPT female (15mm) nitrogen supply outlet
  • ¼” NPT female (6.35mm) drain
  • 24.5″ (W) X 36.5″ (H) X 9.25″ (D) (622mm (W) x 927mm (H) x 235mm (D)), 125 lbs (57 kg) 
  • FM 1035 Approved

Downloads

AG-950 Product Spec Sheet
AG-950 CAD File

AG-2000
  • 2000 gallon (7,571 liters) total capacity
  • 800 gallon (3,028 liters) fill requirement met with integral oil-less compressor
  • 200-240 V power required
  • ½” NPT female (15mm) nitrogen supply outlet
  • ¼” NPT female (6.35mm) drain
  • 28.5″ (W) X 39.5″ (H) X 11.5″ (D) (724mm (W) x 1003mm (H) x 292mm (D)), 208 lbs (95 kg)
  • FM 1035 Approved

Downloads

AG-2000 Product Spec Sheet
AG-2000 CAD File

AG-3500
  • 3500 gallon (13,249 liters) total capacity
  • 800 gallon (3,028 liters) fill requirement met with integral oil-less compressor
  • 200-240 V power required
  • ½” NPT female (15mm) nitrogen supply outlet
  • ¼” NPT female (6.35mm) drain
  • 24.5″ (W) X 36.5″ (H) X 9.25″ (D) (724mm (W) x 1003mm (H) x 292mm (D)), 220 lbs (100 kg)
  • FM 1035 Approved

Downloads

AG-3500 Product Spec Sheet
AG-3500 CAD File

Legacy Products

PGEN-3
  • 675 gallon total capacity
  • 215 gallon fill requirement met with integral oil-less compressor*
  • 120V power required
  • ½” NPT female nitrogen supply outlet
  • ¼” NPT female drain
  • 24.5″ (W) X 36.5″ (H) X 9.25″ (D), 125 lbs

*Based on meeting 30 minute fill requirement at 40 psi.

Downloads

PGEN-3 Product Spec Sheet
PGEN-3 CAD File

PGEN-5
  • 950 gallon total capacity
  • 265 gallon fill requirement met with integral oil-less compressor*
  • 120V power required
  • ½” NPT female nitrogen supply outlet
  • ¼” NPT female drain
  • 24.5″ (W) X 36.5″ (H) X 9.25″ (D), 125 lbs

*Based on meeting 30 minute fill requirement at 40 psi.

Downloads

PGEN-5 Product Spec Sheet
PGEN-5 CAD File

PGEN-10
  • 2,000 gallon total capacity
  • 800 gallon fill requirement met with integral oil-less compressor
  • 220-240V power required
  • 1/2" NPT female nitrogen supply outlet
  • 1/4" NPT female drain
  • 28.5 " (W) X 39.5" (H) X 11.5" (D), 208 lbs

*Based on meeting 30 minute fill requirement at 40 psi.

Downloads

PGEN-10 Product Spec Sheet
PGEN-10 CAD File

PGEN-20

3,500 gallon total capacity

  • 800 gallon fill requirement met with integral oil-less compressor*
  • 220-240v power required
  • ½” NPT female nitrogen supply outlet
  • ¼” NPT female drain
  • 28.5″ (W) X 39.5″ (H) X 11.5″ (D), 220 lbs

*Based on meeting 30 minute fill requirement at 40 psi.

Downloads

PGEN-20 Product Spec Sheet
PGEN-20 CAD File